Table of Contents
Advertisement
08/MASK, FENDER
Installing the rear fender
12.6
–
Check parts for damage and wear. Replace damaged or worn parts.
–
Raise the rear of the air filter box lid
press on the carburetor connection boot to kink it at that location. This prevents the
carburetor connection boot from disconnecting from the carburetor.
–
Position the front fender
–
Fix the air filter box lid in the fender.
200148-11
–
Fit and tighten screws
Specification
Remaining screws, chassis
–
Mount the seat (
200149-11
. At the same time, use your other hand to
.
with collar sleeves.
M6
P. 52)
58
10 Nm (7.4 lbf ft)
Advertisement
Table of Contents
