30/ENGINE
–
Fix the cable with cable clamps
600167-11
–
Position the slave cylinder of clutch
Specification
Slave cylinder of the clutch on engine
case
–
Connect the negative (minus) cable of the battery.
–
Install the engine sprocket. (
–
Install the carburetor. (
–
Attach the reverse gear Bowden cable. (
600166-11
–
Install the manifold. (
–
Install the rear shock absorber. (
–
Fill coolant / bleed cooling system. (
–
Install the engine guard. (
–
Make a short test ride.
–
Check the engine for leakage.
–
Check the engine oil level. (
–
Check the cooling system for leakage.
–
Check the coolant level. (
and sleeves
.
. Mount and tighten screws
M6
P. 161)
P. 156)
P. 17)
P. 49)
P. 37)
P. 164)
P. 18)
P. 169)
P. 162)
86
.
10 Nm (7.4 lbf ft)