Installing The Rear Fender - KTM 525 XC ATV 2008 Owner's Manual

MAINTENANCE ON CHASSIS AND ENGINE

Installing the rear fender

Remove screws
200149-10
Raise the rear of the air filter box lid
press on the carburetor connection boot to kink it at that location. This prevents the
carburetor connection boot from disconnecting from the carburetor.
Raise the fender
200148-10
Check parts for damage and wear. Replace damaged or worn parts.
Raise the rear of the air filter box lid
press on the carburetor connection boot to kink it at that location. This prevents the
carburetor connection boot from disconnecting from the carburetor.
Position the front fender
Fix the air filter box lid in the fender.
200148-11
Fit and tighten screws
Specification
Remaining screws, chassis
Mount the seat (
200149-11
. Remove the collar sleeves.
. At the same time, use your other hand to
at the rear and remove it.
. At the same time, use your other hand to
.
with collar sleeves.
M6
P. 61)
64
10 Nm (7.4 lbf ft)