Installing The Engine - KTM 450 XC 2008 Repair Manual

30/ENGINE

Installing the engine

17.2
–
Remove screws
600179-10
–
Remove screw
Info
Having an assistant is helpful in this step.
600177-10
–
Position the engine in the frame. Mount screw
Info
Having an assistant is helpful in this step.
600177-11
–
Position the engine bearer on the frame. Mount screws
yet.
Specification
Engine bracket screw
–
Insert screw
600178-10
–
Position the engine bearer on the frame. Mount screws
yet.
Specification
Engine bracket screw
–
Mount screw
Specification
Engine bracket screw
600176-11
–
Raise the swingarm and position it between the frame and the engine. Insert
swingarm pivot
–
Attach the rear brake line to holder
600180-10
and take off the engine bearer.

and take the engine out of the frame toward the front right.

.

but do not tighten it yet.

.

.

but do not tighten it yet.

but do not tighten them

M10 60 Nm
(44.3 lbf ft)
but do not tighten them

M10 60 Nm
(44.3 lbf ft)
M10 60 Nm
(44.3 lbf ft)
84