Changing The Camshaft Bearing - KTM 450 XC 2008 Repair Manual

30/ENGINE - WORK ON INDIVIDUAL PARTS

Changing the camshaft bearing

19.9
–
Remove lock ring
Circlip pliers reverse (51012011000) (
–
Pull off water pump wheel
600261-10
–
Remove pin
Info
After removing, always change the shaft seal rings in the seal holder.
600262-10
–
Take off washer
600263-10
–
Remove camshaft bearing
Extractor (59029033000) (
600264-10
–
Check parts for damage and wear. Change damaged or worn parts.
–
Mount the new camshaft bearing
600263-12
–
Attach special tool
rings and O-rings.
Mounting sleeve (59029005010) (
Info
When mounting the seal holder, the threads in the seal holder must be at
the top.
–
Remove the special tool.
600267-11
.

.

. Pull seal holder from the camshaft.
 
.

using special tool

P. 209)
. Mount washer

to the camshaft. Mount seal holder

P. 208)
P. 207)
.

.

with the new shaft seal

105