04/SHOCK ABSORBER, SWINGARM
Rear shock absorber - installing the heim joint
8.28
Info
The operations are the same on the upper and lower heim joint.
–
Remove seal rings
200254-10
–
Place special tool
Press drift (83019050014)
Mounting sleeve (83019050007) (
200255-10
–
Place special tool
cial tool
.
Press drift (83019050014)
Mounting sleeve (83019050007) (
200255-11
–
Mount and grease seal rings
Lubricant (T158) (
200254-10
–
Press in both flange adapters
–
Install the rear shock absorber. (
200256-10
on both sides.
underneath and press out the heim joint using special tool
P. 214)
underneath and push the heim joint to the middle using spe-
P. 214)
on both sides.
P. 205)
of the heim joint.
P. 37)
47
.