04/SHOCK ABSORBER, SWINGARM
–
Mount the floating piston using the special tool and slide it all the way into the
reservoir.
Disassembly/assembly tool (83019050005) (
200301-10
–
Measure and note down the distance from the upper rim of the reservoir to the
upper edge of the floating piston.
Info
Ensure that the floating piston has been pushed all the way in.
200302-10
–
Fill the shock absorber tube about half way.
Shock absorber oil Öhlins
–
Carefully mount the piston rod.
–
Remove the special tool.
Disassembly/assembly tool (83019050005) (
200303-10
–
Grease the O-ring of the seal ring holder.
Lubricant (T158) (
–
Mount seal ring holder
–
Mount lock ring
Info
Do not scratch the inner surface.
–
Pull out the piston rod until the seal ring holder is flush with the lock ring.
200285-11
®
P. 205)
.
.
P. 213)
P. 213)
26