Removing The Primary Gear With The Free-Wheel-Gear; Removing The Spark Plug; Removing The Generator Cover; Installing The Crankshaft Locking Bolt - KTM 450 XC 2008 Repair Manual

30/DISASSEMBLING THE ENGINE

Removing the primary gear with the free-wheel-gear

18.14

Removing the spark plug

18.15

Removing the generator cover

18.16

Installing the crankshaft locking bolt

18.17
–
Remove primary gear
Extractor (59029033000) (
Info
Make sure that the washer spring remains in place.
600204-10
–
Remove the spark plug using special tool
Spark plug wrench (75029172000) (
600207-10
–
Remove screws
600205-10
–
Remove centering pins
600206-10
–
Set the engine to ignition top dead center.
Info
In the top dead center position, conductive element
ignition pulse generator.
600208-10
and free-wheel-gear using the special tool.

P. 209)
.

P. 210)
. Take off generator cover
 
. Remove the generator cover seal.

.
is located above the

91