30/ASSEMBLING THE ENGINE
Adjusting the valve clearance
20.18
Installing the valve cover
20.19
Installing the water pump cover
20.20
Installing the oil line
20.21
Installing the spark plug
20.22
–
Set the valve clearance by turning adjusting screw
arm using special tool
Specification
Valve clearance, cold, intake
Valve clearance, cold, exhaust
Nut, adjusting screw, valve clearance
600353-10
–
Clean the sealing areas.
–
Position valve cover
Specification
Screw, valve cover
600356-10
–
Clean the sealing areas.
–
Position water pump cover
–
Mount and tighten screws
Specification
Screw, water pump cover
600219-11
–
Position oil line
–
Mount and tighten banjo bolt
Specification
Banjo bolt, oil line
Jet screw, oil line
600218-11
–
Mount and tighten the spark plug using special tool
Specification
Spark plug
Spark plug wrench (75029172000) (
600207-10
.
0.10... 0.15 mm (0.0039...
0.0059 in)
0.10... 0.15 mm (0.0039...
0.0059 in)
M6x0,75
with the seal. Mount and tighten the screws.
M6
with the seal.
.
M6
.
and jet screw
M8
M8
M12x1,25
P. 210)
between the valve and rocker
11 Nm (8.1 lbf ft)
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
with the seal rings.
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
.
17 Nm
(12.5 lbf ft)
136