30/ASSEMBLING THE ENGINE
Filling up with engine oil
20.40
Installing the shift lever
20.41
Installing the clutch push rod
20.42
Removing the engine from the universal mounting rack
20.43
–
Oil the O-rings of oil filter covers
–
Mount and tighten screws
Specification
Screw, oil filter cover
600390-10
–
Remove screw cap
Engine oil
–
Mount and tighten screw cap
600187-11
–
Position shift lever
Specification
Screw, shift lever
600394-10
–
Insert clutch push rod
600395-10
–
Remove the screw/nut from the special tool.
Engine holder (83112001050) (
–
Remove the engine from the universal mounting rack.
600441-01
and mount them with the oil filter covers.
.
M5
on the clutch cover and fill up with engine oil.
2.00 l (2.11 qt.)
External tem-
perature: ≥ 0 °C
(≥ 32 °F)
External tem-
perature: < 0 °C
(< 32 °F)
.
. Mount and tighten screw
M6
10 Nm
(7.4 lbf ft)
.
P. 215)
6 Nm (4.4 lbf ft)
Engine oil
(SAE 10W/50)
(
P. 203)
Engine oil
(SAE 5W/40)
(
P. 203)
with washers.
Loctite
®
243™
144