08/MASK, FENDER
08/MASK, FENDER
12
Removing the front cover
12.1
Installing the front cover
12.2
Removing the front trim
12.3
–
Remove screw
–
Slide the front cover up and remove it.
100053-10
–
Check parts for damage and wear. Replace damaged or worn parts.
–
Position the front cover in the slots
–
Mount and tighten screw .
100055-10
–
Remove the front cover. (
–
Remove screws
–
Raise the front trim and disconnect the plug-in connectors from the head light and
the emergency OFF switch with the rip cord.
–
Remove the front trim.
100075-10
.
on both sides of the front trim.
P. 56)
.
56