61/ATV FRONT SECTION
Adjusting the fork offset
27.4
Info
The left and right fork offset should have the same settings.
The operations are the same on the left and right.
Removing the wheel carrier
27.5
Info
The operations are the same on the left and right sides.
–
Jack up the vehicle. (
–
Remove screws
–
Check parts for damage and wear. Replace damaged or worn parts.
–
Place the A-arm with the bushings
screws
.
Specification
Screw, A-arm top
–
Remove the vehicle from the work stand. (
600126-11
–
Remove the wheel/wheels. (
–
Remove brake disc guard
–
Remove cable clamp
600445-10
–
Pull and release the handbrake lever.
Locking pawl moves into its basic position, parking brake is deactivated.
–
Remove screws
press back the brake piston.
–
Remove the brake caliper.
Info
Do not operate the hand brake lever when the brake caliper has been
removed.
600446-10
P. 14)
with bushings
.
in the desired position. Mount and tighten
M10x52
P. 59)
.
and take off brake line guide
. Press the brake caliper by hand on to the brake disc in order to
45 Nm
(33.2 lbf ft)
P. 14)
.
175