Installing The Carburetor - KTM 450 XC 2008 Repair Manual

31/CARBURETOR

Installing the carburetor

21.18
–
Position the accelerator pump cover. Mount and tighten screws
Specification
Other screws, carburetor
700038-12
–
Position and mount the vent hoses.
–
Position the hose holder. Mount the screws
pattern.
Specification
Other screws, carburetor
–
Adjust the position of throttle valve sensor TPS. (
–
Install the carburetor. (
700034-12
–
Set the carburetor on the frame and attach the gas Bowden cable.
Info
Ensure that the gas Bowden cable has been laid correctly.
–
Adjust the gas Bowden cable play and tighten nut
Specification
Play in gas Bowden cable
600163-11
–
Position carburetor cover
Specification
Other screws, carburetor
600162-11
–
Insert carburetor
600161-11
–
Position hose clamp
600160-11
M4

M4
P. 156)
3... 5 mm (0.12... 0.2 in)
. Mount and tighten screws

M5
into the rubber sleeve.

and tighten.

.

2 Nm (1.5 lbf ft)
and tighten all screws in a crisscross
2 Nm (1.5 lbf ft)
P. 152)
.

.

5 Nm (3.7 lbf ft)
156