04/SHOCK ABSORBER, SWINGARM
Front shock absorber - installing the heim joint
8.15
Info
The operations are the same on the upper and lower heim joint.
Rear shock absorber - adjusting the compression damping
8.16
Warning
Danger of accidents Do not make any radical changes to the adjustment of the shock absorbers.
–
Only make adjustments within the recommended range.
Info
The compression damping setting has an impact on the compression of the shock absorber.
–
Place special tool
Press drift (83019050015) (
Mounting sleeve (83019050013) (
200297-10
–
Place special tool
cial tool
.
Mounting sleeve (83019050013) (
Press drift (83019050014) (
200297-11
–
Mount and grease seal rings
Lubricant (T158) (
200296-10
–
Press in both flange adapters
200295-11
underneath and press out the heim joint using special tool
P. 214)
P. 214)
underneath and push the heim joint to the middle using spe-
P. 214)
P. 214)
on both sides.
P. 205)
of the heim joint.
34
.