30/ENGINE - WORK ON INDIVIDUAL PARTS
Removing the free-wheel
19.41
Checking the free-wheel
19.42
Installing the free-wheel
19.43
–
Press together spreader ring
600435-10
–
Take free-wheel
600436-11
–
Place free-wheel-gear
clockwise, but do not tilt it!
–
Check the locking action of free-wheel-gear
»
The primary pinion cannot be rotated clockwise or does not block counterclock-
wise:
–
Remove the free-wheel. (
–
Turn the free-wheel 180°.
–
Install the free-wheel. (
600313-10
–
Oil all parts well.
–
Slide free-wheel
Info
Note the direction of rotation.
600436-10
–
Mount spreader ring
–
Ensure that all protrusions of the spreader ring engage through slots of the free-
wheel in the groove of the primary pinion.
600435-11
with suitable pliers and take it off.
out of the primary pinion.
in primary pinion
P. 127)
P. 127)
into the primary pinion.
.
while rotating the free-wheel-gear
.
127