Table of Contents
Advertisement
38/LUBRICATION SYSTEM
Checking engine oil level
25.6
Info
The engine oil level can be checked on a cold or hot engine.
Topping up engine oil
25.7
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
–
Park the vehicle on a horizontal surface.
Condition
The engine is at operating temperature.
–
Check the engine oil level.
Info
After switching off the engine, wait one minute before checking the
level.
The engine oil reaches the middle of the viewer
600131-10
»
When the engine oil does not reach the middle of the viewer
–
Condition
Engine is cold.
–
Check the engine oil level.
The engine oil reaches the bottom of the viewer
»
When the engine oil does not reach the bottom of the viewer
–
600131-11
–
Check the engine for leakage.
–
Remove the screw cap
Condition
External temperature: ≥ 0 °C (≥ 32 °F)
Engine oil (SAE 10W/50) (
Condition
External temperature: < 0 °C (< 32 °F)
Engine oil (SAE 5W/40) (
600132-10
Info
To ensure optimal engine oil performance, it is advisable to not use different
engine oils.
We recommend making an oil change in this case.
–
Mount and tighten screw cap
Top up the engine oil. (
P. 169)
Top up the engine oil. (
P. 169)
on the clutch cover and fill up with engine oil.
P. 203)
P. 203)
.
169
.
:
.
:
Advertisement
Table of Contents
