04/SHOCK ABSORBER, SWINGARM
Front shock absorber - disassembling the shock absorber
8.9
–
Remove the spring of the front shock absorber. (
–
Note down the current state of the rebound and compression damping.
–
Fully open the adjusting elements of the rebound and compression damping.
–
Remove screw
200280-10
–
Pierce the membrane using needle
Filling adapter (83019050016) (
The nitrogen pressure is relieved.
200281-10
–
Push in locking cap
Info
Do not scratch the inner surface.
200282-10
–
Remove the locking cap of the reservoir using the special tool.
Disassembly/assembly tool (83019050004) (
200283-10
–
Remove locking cap
Disassembly fork (83019050006) (
200284-10
of the reservoir.
of the special tool.
P. 215)
of the reservoir. Remove lock ring
of the shock absorber tube using the special tool.
P. 213)
P. 22)
.
P. 213)
24