30/ENGINE
–
Mount and tighten nut
Specification
Nut, swingarm pivot
–
Tighten all previously mounted screws.
Specification
Engine carrying screw
600173-11
Engine bracket screw
–
If the vehicle is to be raised, secure the swingarm to the subframe with a tension
belt
.
600172-11
–
Position the footbrake cylinder. Mount and tighten screws
Specification
Screw, foot brake cylinder
–
Reconnect spring
Spring hooks (50305017000) (
600171-11
–
Attach the cooler hoses. Position hose clamps
–
Attach engine breather hose
–
Attach the spark plug connector.
600170-11
–
Position the electrical connection on the starter motor. Mount and tighten nut
Slide on the cover.
–
Position the ground wire. Mount and tighten screw
Specification
Screw, starter engine
600169-11
–
Position the cable and connect connector
600168-11
.
M16x1,5
M10
M10
M6
.
P. 207)
and secure with a hose clip.
M6
to the wiring harness.
100 Nm
(73.8 lbf ft)
60 Nm
(44.3 lbf ft)
60 Nm
(44.3 lbf ft)
.
7 Nm
Loctite
®
243™
(5.2 lbf ft)
and tighten.
.
10 Nm (7.4 lbf ft)
85
.