Table of Contents
Advertisement
04/SHOCK ABSORBER, SWINGARM
Front shock absorber - assembling the piston rod
8.13
–
Remove the locking cap and bump rubber.
200294-10
–
Clamp the piston rod with the heim joint in a vise.
–
Mount the bump rubber and locking cap.
200294-10
–
Position special tool
Mounting sleeve (83019050001) (
–
Grease the seal ring and slide seal ring holder
Lubricant (T625) (
–
Remove the special tool.
200298-10
–
Mount the plates.
200292-10
–
Mount lock ring
200291-11
–
Mount supporting plate
Info
The compression damping shim set must be mounted with the smaller disks
facing downward.
200290-11
on the piston rod.
P. 213)
P. 205)
.
and compression damping shim set
onto the piston rod.
.
32
Advertisement
Table of Contents
