08/MASK, FENDER
Installing the rear fender
12.8
–
Raise the rear of air filter box lid
on the carburetor connection boot to kink it at that location. This prevents the car-
buretor connection boot from disconnecting from the carburetor.
–
Position front fender
–
Fix the air filter box lid in the fender.
Info
If the air filter box lid is not correctly mounted, dust and dirt can penetrate
into the engine and cause damage.
301821-11
–
Mount and tighten screws
Guideline
Remaining screws, chassis
–
Mount the seat. (
301822-11
. At the same time, use your other hand to press
.
.
M6
p. 63)
71
10 Nm (7.4 lbf ft)