02/HANDLEBAR, CONTROLS
Detaching the reverse gear Bowden cable
6.7
Attaching the reverse gear Bowden cable
6.8
–
Loosen nut
–
Detach the Bowden cable from abutment plate
600181-10
–
Attach the Bowden cable to locking shaft lever
–
Mount nut
Specification
Play in the Bowden cable on the
reverse gear release lever
–
Tighten nut
–
Check the play in the Bowden cable using the reverse gear release lever. (
600181-11
.
in such a way that the specified play is present in the Bowden cable.
.
and locking shaft lever
and abutment plate
10 mm (0.39 in)
17
.
.
P. 16)