Removing The Timing Chain Tensioner; Removing The Water Pump Cover; Removing The Cylinder Head Top Section; Removing The Camshaft - KTM 450 XC 2008 Repair Manual

30/DISASSEMBLING THE ENGINE

Removing the timing chain tensioner

18.22

Removing the water pump cover

18.23

Removing the cylinder head top section

18.24

Removing the camshaft

18.25
–
Remove screw
Info
Screw
600221-10
–
Pull out spring
–
Remove screws
600222-10
–
Remove screws
–
Take off the water pump cover seal.
600219-10
–
Remove screws
–
Remove screws
–
Take off the cylinder head top section.
600220-10
–
Separate the timing chain using the special tool.
Timing chain separating and riveting tool (59029020000) (
Info
Ensure that the bolt that is pushed out does not drop into the engine.
Hold the timing chain so that it does not fall into the timing chain shaft.
600223-01
with the sealing disc.

is spring loaded!

.

and pull out timing chain tensioner

. Take off water pump cover

and take off the valve cover.

and .
 
.

.

P. 209)
94