Table of Contents
Advertisement
30/ENGINE - WORK ON INDIVIDUAL PARTS
Assembling the autodecompressor
19.8
–
Check parts for damage and wear. Replace damaged or worn parts.
–
Position autodecompression spring
Preload the autodecompression spring by approx. ½ turn in the direction of the
arrow and slide onto the autodecompression shaft.
600266-11
–
Ensure that the autodecompression spring
–
Check that the autodecompression shaft moves easily.
»
If the autodecompression spring does not push the autodecompression shaft
back in the original position:
–
Tighten the autodecompression spring or replace it.
600260-11
–
Mount camshaft bearing
600263-11
–
Attach special tool
seal rings and O-rings.
Mounting sleeve (59029005010) (
Info
When mounting the seal holder, the threads in the seal holder must be at
the top.
–
Remove the special tool.
600267-10
–
Mount pin
600262-11
–
Position water pump wheel
Circlip pliers reverse (51012011000) (
600261-11
and insert autodecompression shaft
. Mount washer
to the camshaft. Mount the seal holder with the new shaft
P. 208)
.
and mount lock ring
engages in the groove.
.
.
P. 207)
104
.
Advertisement
Table of Contents
