30/ASSEMBLING THE ENGINE
Installing the camshaft
20.13
–
Mount the cylinder head. Mount screws
Specification
Screw, cylinder head
600342-10
–
Mount and tighten screws
Specification
Screw, cylinder head
600343-10
–
Insert the camshaft. Drill hole
compression stop
600346-10
–
Align camshaft marking
600347-10
–
Place the timing chain over the camshaft gear and connect with a new rivet link.
Clamp tab
Timing chain separating and riveting tool (59029020000) (
600348-10
.
in the seal holder must face upward and autde-
must be at the top.
with the cylinder head.
with the special tool.
and tighten in a crisscross pattern.
M10
Step 1
40 Nm
(29.5 lbf ft)
Step 2
50 Nm
(36.9 lbf ft)
M6
10 Nm (7.4 lbf ft)
P. 209)
133