04/SHOCK ABSORBER, SWINGARM
Installing the front shock absorber
8.6
Info
The operations are the same on the left and right sides.
Front shock absorber - removing the spring
8.7
–
Position the front shock absorber with the reservoir toward the rear. Mount and
tighten screw
Specification
Screw, front shock absorber
600475-11
–
Position the shock absorber in the lower A-arm. Mount and tighten screw
Specification
Screw, front shock absorber
–
Remove the tension belt.
–
Remove the vehicle from the work stand. (
600474-11
–
Remove the front shock absorber. (
–
Measure the spring length in its preloaded state and determine the position of the
locking clip. Note down both values.
–
Pull spring
–
Remove the spring.
200277-10
–
Remove protecting sleeve
200278-10
–
Remove threaded bush
–
Remove the spring retainer.
200279-10
.
P. 21)
down and remove spring retainer
.
with the spring and washer.
M10
45 Nm
(33.2 lbf ft)
M10
45 Nm
(33.2 lbf ft)
P. 14)
.
22
.