Installing The Outer Clutch Hub And Clutch Discs - KTM 450 XC 2008 Repair Manual

30/ASSEMBLING THE ENGINE

Installing the outer clutch hub and clutch discs

20.34
–
Mount washer
600376-10
–
Mount outer clutch hub
with grease.
600377-10
–
Position stepped washer
600378-10
–
Slide on inner clutch hub
600379-10
–
Mount the inner clutch hub sleeves
Clutch holder (59029003100) (
–
Tighten nut
Clutch holder (59029003100) (
–
Secure the nut with lock washer
–
Remove the special tool.
600380-10
–
Thoroughly oil clutch facing discs
–
Beginning with a thin clutch disc, place all further clutch facing discs and clutch
discs alternately into the outer clutch hub.
Info
The two outer clutch discs
discs
600439-01
and both needle bearings

and insert the two half washers

with the recess facing the half washers.

. Position the new lock washer

and attach special tool

P. 208)
.

P. 208)
.

.

are thinner than the four inner clutch

.

.

into the main shaft

and mount nut

.

141
.
