31/CARBURETOR
–
Remove screw
–
Pull the jet needle out of the throttle slide.
–
Remove screw
600444-10
–
Pull up throttle slide arm
throttle slide roller
700037-10
–
Remove screws
700038-10
–
Remove seal rings
–
Remove screws
700039-10
–
Remove fulcrum pin
–
Remove main jet
700044-12
–
Remove idling jet
–
Screw in mixture control screw
ber of rotations.
–
Remove the mixture control screw with the spring, washer and O-ring.
700045-12
with the spring and washer.
.
. Take throttle slide
and the throttle slide plate.
. Take off the accelerator pump cover with the seal ring.
, spring
and membrane
and take off the float chamber body.
. Take off the float and float needle valve.
.
, cold start jet
, needle jet
to the stop, counting and noting down the num-
out of the carburetor along with
.
and buffer plate
.
147