30/ASSEMBLING THE ENGINE
30/ASSEMBLING THE ENGINE
20
Installing the crankshaft
20.1
Installing the balancer shaft
20.2
Installing the transmission shaft
20.3
–
Clamp the right section of the engine case into the engine work stand.
Universal mounting rack (56012001000) (
Engine holder (83112001050) (
–
Slide crankshaft
engine case.
600244-10
–
Align the marking on balancer shaft
the balancer shaft.
600243-10
–
Position the reverse gear shaft with pin
600328-10
–
Slide both transmission shafts
seats together.
Info
Make sure not to misplace the washers.
600331-10
–
Slide on inner bearing race
600332-10
P. 215)
all the way into the bearing seat of the right section of the
and the crankshaft to each other and insert
aligned to notch
,
and reverse gear shaft
.
P. 207)
.
into the bearing
128