Table of Contents
Advertisement
30/DISASSEMBLING THE ENGINE
Removing the ignition pulse generator
18.18
Removing the rotor
18.19
–
Remove screw
600209-11
–
Screw in special tool
Crankshaft locking bolt (113080802) (
Info
With perceptible resistance, move the flywheel back and forth so that the
special tool can engage in the recess of the crankshaft.
600210-10
–
Remove screws
–
Pull the cable support sleeve out of the engine case. Take off ignition pulse genera-
tor
.
600211-10
–
Remove nut
600212-10
–
Attach special tool
pull off rotor
Extractor (58012009000) (
Info
Make sure that the washer spring remains in place.
600213-10
.
until the crankshaft is blocked.
.
with the spring washer.
to the rotor. Apply counterpressure with the special tool and
by turning in the screw.
P. 207)
P. 207)
92
Advertisement
Table of Contents
