30/ASSEMBLING THE ENGINE
–
Mount screws
and tighten them when all screws have been mounted on the left section of the engine case.
Specification
Screw, engine housing
–
Mount screws
and tighten them when all screws have been mounted on the left section of the engine case.
Specification
Screw, engine housing
–
Mount screws
and tighten them when all screws have been mounted on the left section of the engine case.
Specification
Screw, engine housing
–
Mount screws
and tighten them when all screws have been mounted on the left section of the engine case.
Specification
Screw, engine housing
–
Mount screw
and tighten all screws in a crisscross pattern.
Specification
Screw, engine housing
–
Insert dowels
–
Grease the sealing areas. Apply sealing compound to the left section of the engine
case.
5910
Loctite
®
–
Mount the left section of the engine case. If necessary, tap it lightly with a rubber
hammer and turn the transmission shaft.
Info
Do not tighten the engine case sections using the screws.
600335-10
.
M6x30
M6x45
M6x60
M6x65
M6x75
130
600235-11
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)