MAINTENANCE ON CHASSIS AND ENGINE
Adjusting the fork offset
9.20
Info
The left and right fork offset should have the same settings.
The operations are the same on the left and right.
Toe width of rear axle
9.21
x
–
Jack up the vehicle. (
–
Remove screws
–
Place the A-arm with bushings
Guideline
Screw, A-arm top
–
Remove the vehicle from the work stand. (
300274-11
The toe width
Difference between
narrow/wide toe
301794-10
p. 50)
with bushings
.
in the desired position. Mount and tighten screws
can be adjusted by installed the spacer in various ways.
76 mm (2.99 in)
M10x52
45 Nm
(33.2 lbf ft)
p. 50)
74
.