Adjusting The Fork Offset; Removing The Wheel Carrier - KTM 450 SX ATV 2010 Repair Manual

61/ATV FRONT END

Adjusting the fork offset

27.4
Info
The left and right fork offset should have the same settings.
The operations are the same on the left and right.

Removing the wheel carrier

27.5
Info
The operations are the same on the left and right.
–
Jack up the vehicle. (
–
Remove screws
–
Place the A-arm with bushings
screws .

Guideline
Screw, A-arm top
–
Remove the vehicle from the work stand. (
300274-11
–
Remove the wheel/wheels. (
–
Remove brake disc guard
–
Remove cable clamp
301500-10
–
Pull the hand brake lever and release it again.
Locking pawl moves into its basic position, parking brake is deactivated.
–
Remove screws
push back the brake piston.
–
Remove the brake caliper.
Info
Do not operate the hand brake lever when the brake caliper has been
removed.
301501-10
p. 12)
with bushings .
 
in the desired position. Mount and tighten

M10x52
p. 72)
.

and take off brake line guide

. Press the brake caliper onto the brake disc by hand in order to

45 Nm
(33.2 lbf ft)
p. 12)
.

194