I Internal Connection; I External Connection; Connecting A Pc To A Merlin Magix Integrated System; I Direct Local Connection - Avaya MERLIN MAGIX Maintenance And Troubleshooting Manual

System Programming Basics
If you have multiple modems installed in your system, after clicking OK, you may be
I
prompted to select the modem you want to connect with.
Clicking CANCEL from the Connection Selection screen causes you to return to either
I
the Main screen or the First-Time User Wizard, depending on from where the screen
was started.
While setting up a Manual Connection, you will also be prompted to set the Maximum
I
Speed for connection. It is recommended that you select 2400.
Connecting a PC to a MERLIN MAGIX Integrated
System
There are three ways to connect to the MERLIN MAGIX system:
Direct Local Connection
I
Internal Connection
I
External Connection
I
Direct Local Connection
For a direct local connection, you must connect the PC to the system programming jack. This is the
lower modular RS-232 jack on the processor module, as shown in Figure 6-2. (The upper jack is
reserved for the SMDR printer.)
For direct local connections, the system supports speeds of 1,200 and 2,400 bps.
Setting Up a Site
3-14
3
3