Avaya MERLIN MAGIX Maintenance And Troubleshooting Manual page 385

The Save dialog box displays.
5. Enter the name and location of the file to be saved.
6. Click Save.
The progress dialog box displays.
7. Click Cancel to exit.
Boards
The Boards option allows qualified service personnel to add a module to the next available slot.
The system must be idle to use this option. This option is not available from the system
programming console.
The Boards option is also available in Surrogate mode. In Surrogate mode, you can assign trunk
and extension modules (boards) to slots, even though the modules have not actually been
installed. This type of board is referred to as a "phantom" or "null" board.
You cannot use the Boards option to change an actual module type. All modules assigned with the
Boards option, including phantom modules, are cleared (unassigned) if you perform a board
renumber ( System
page 3-46 for complete instructions for board renumbering when replacing MLX modules.
→
Board Renum ). See
3
''Board Renumbering with the 016 MLX Module'' on
Basic System Management Procedures
About WinSPM
3-33