Browse - Avaya MERLIN MAGIX Maintenance And Troubleshooting Manual

System Programming Basics
5. Assign or remove the module from the slot entered in the previous Step.
module name
Enter slot numbers
(01—17)
nn
Backspace
Back
To remove the module type from the specified slot number, click 8 ( Delete ). The
I
Boards menu reappears.
To assign the module type to the specified slot number and assign that same module type
I
to another slot, click 9 ( Next ).
To assign the module type to the specified slot number and assign a different module type
I
to another slot, click 0 ( Enter ).
To terminate the procedure and assign a different module, click 5 ( Back ) and repeat
I
Steps 2 through 4.
To view types of modules assigned to all slots, click d ( Inspect ).
I
6. To save your entry, click 5 ( Back ).
The programming session terminates and the system restarts.

Browse

The Browse option allows you to browse through reports and notes saved in WinSPM.
→
C8
Select hard disk or floppy
To view the next page of a report, click d.
To view the previous page of a report, click u.
To return to the beginning of a report, click h.
WinSPM
1. From the WinSPM Main window Outlook bar, select View.
2. From the Outlook bar, click the Browse Notes & Reports icon.
Basic System Management Procedures
3-36
module name = option selected in Step 2
nn = slot entered in Step 5 (second digit
will not display.
Delete
Next
Enter
→
3
→ →
0
Select a Report
→
0 E to Exit