Winspm Help; Using Standard Spm Mode; Displaying The Spm Main Menu - Avaya MERLIN MAGIX Maintenance And Troubleshooting Manual

WinSPM Help

To access the WinSPM Help screens, perform one of the following:
Press 1.
I
Press A+H.
I
Click the Help button (when available).
I

Using Standard SPM Mode

Standard SPM provides an emulation display of the system programming console. It allows all
system programming of the MERLIN MAGIX system to be performed from a PC and supports
programming for options not included in the Quick Access GUI. In addition, the SPM Main Menu
provides four options-- Backup, Boards, Print Opts, and Restore --that are intended for qualified
service personnel only and are not available from the system programming console.This section
describes how to use the Standard SPM Mode screens.

Displaying the SPM Main Menu

To open WinSPM and display the SPM Main Menu, follow these steps:
1. On your desktop, double-click the WinSPM icon. (Depending on options selected during
installation, you might select WinSPM from your Start Menu or Lucent Solutions folder.)
2. Enter your user name and password, then click OK. The WinSPM main screen appears.
3. In the left-hand panel of the WinSPM main screen, click the Connect button. The Connection
Selection screen appears.
4. From the Connection Selection screen, click the site name for the site you want to connect to.
5. Click the Connection Type for the session, then click OK.
6. In the left-hand panel of the WinSPM main screen, click the Standard SPM icon. The system
programming console appears in the emulation window and the SPM Main Menu appears in
the console display area (Figure 3-5).
About WinSPM
3
3
3

WinSPM Help

3-27