System Programming Console Buttons - Avaya MERLIN MAGIX Maintenance And Troubleshooting Manual

Refer to the Figure
Table 2-2. DSS 4450 Components
Component
DSS Buttons
Fixed Buttons
LEDs (Light-
Emitting Diodes)

System Programming Console Buttons

Use the 14 buttons located on either side of the 4424LD+ or MLX-20L console display area for
system programming. These buttons are arranged in two columns of seven buttons. On the
4424LD+ console, three of the four fixed display buttons have different labels than those on the
MLX-20L console, although the same functionality is provided.
Figure 2-4. 4424LD+ Display Buttons and Main Menu
2-3 for the location of the components described in the following table.
Function
Fifty buttons used for one-touch dialing of co-workers' extensions to make
or transfer calls. DSS buttons are also used to page co-workers over
speakerphones, to park calls, and to handle outside calls.
Ten additional buttons, including Message Status, Direct Voice Mail (MLX
DSS only), and three Page buttons. The five remaining buttons on the first
DSS are not used. If a second DSS is connected to the console, the 10
buttons at the bottom of the second DSS are not used.
Fixed Message Status button used with fixed Page buttons to see which
telephones have Message Lights on.
Fixed Page Buttons are three buttons used to select the pages of
extensions that the 50 DSS buttons represent.
The lights that assist in checking feature status.
System Programming Console
2

System Programming Console Buttons

2-7