4. Type the new password again. Do not press R.
Password
Enter New Password again
New Password in use
5. To return to the Standard SPM Mode Main menu, click 5 ( Back ).
Print Options
The Print Opts option allows qualified service personnel to direct the output of system
programming reports either to the PC (where you can save them, browse through them, or print
them with the system programming Print option) or to the SMDR printer.
To direct the output of the system programming reports, follow the steps below:
1. At the Standard SPM Mode Main menu, click 4 to select Print Opts .
SPM Main Menu
Menu: Select Function
Sys Program
Backup
Boards
Print Opts
Monitor
2. Select the target device for the reports.
Printer Options
Make a selection
SMDR Port
PC Port
Back
3. To return to the Standard SPM Mode Main menu, click 5 ( Back ).
SMDR Port Output
See "Printing System Reports" in Feature Reference for more information about the print
procedure using the system console and the SMDR port.
Maintenance
Restore
Pass-Thru
Password
Language
3
3
Basic System Management Procedures
About WinSPM
3-43