Displaying The System Programming Menu From The Console; Idss Lights - Avaya MERLIN MAGIX Maintenance And Troubleshooting Manual

System Programming Basics
DSS Lights
The lights on the DSS (if one is attached to the console) show the status of features being
programmed on the extensions. When you select a feature from a menu, the red LED next to the
DSS button is on, off, or flashing, depending on whether the feature is already programmed on the
corresponding extension. For example, when you select Toll Restrict from the Restrictions menu,
the red LED next to the DSS button lights for each toll-restricted extension. Appendix C in Feature
Reference, provides a table that shows the default DSS status of LEDs for system features.
Displaying the System Programming Menu
from the Console
Follow these steps to begin system programming:
→
Menu
Sys Program
The System Programming Menu appears:
System Programming >
Make a selection
System
SysRenumber
Operator
LinesTrunks
Back
Table 2-4. Description of Options in System Programming Menu
Option
System
SysRenumber
Operator
LinesTrunks
Extensions
Options

Displaying the System Programming Menu from the Console

2-12
→
Start
System Programming:
Make a selection
Extensions Labeling
Options Data
Tables Print
AuxEquip Cntr-Prg
NightService Back
2
2
Language
Description
Set system operating conditions.
Select the system numbering plan and/or
reassign extension numbers with 1- to 4-digit
numbers that are more appropriate or
convenient for your company.
Assign or remove operator positions, and
program operator features (such as Operator
Hold Timer or QCC options).
Program line/trunk options.
Program extension features (such as line
assignments).
Program system-wide features (such as
Transfer Return).