Avaya MERLIN MAGIX Maintenance And Troubleshooting Manual page 169

Maintenance and Troubleshooting
Table 6-5. NI-1 BRI Provisioning Test Result Codes–Continued
Result
Code Description
MERLIN MAGIX
ADMCO
administration error
and/or CO
provisioning error
on that facility
No administration
ADMIN
or incorrect
administration on
that facility
NI-1 BRI Provisioning Test
6-20
Corrective Action
Check that the facility is programmed with the DN provided
by the CO. If the DN was not programmed properly, correct
it and rerun the test. If the error persists, perform the
appropriate set of tests and record the results before
contacting the LEC:
''Outgoing Voice Call Test''
''Incoming Voice Call Test''
and/or
''Outgoing Data Call Test''
''Incoming Data Call Test''
The possible causes of this error are:
Incorrect DN. Error identified at Incoming Voice/Data Call
Test. Incoming calls fail.
Any of the causes listed for CO-V and CO-D
Check that the facility is programmed with the SPID and
DN provided by the CO. If the SPID and DN were not
programmed properly, correct it and rerun the test. If the
error persists, perform the appropriate set of tests and
record the results before contacting the LEC:
''Outgoing Voice Call Test''
''Incoming Voice Call Test''
and/or
''Outgoing Data Call Test''
''Incoming Data Call Test''
The possible causes of this error are:
Incorrect SPID. Error identified at Incoming Voice Call Test;
Outgoing Data Call Test, and/or Incoming Data Call Test.
Both outgoing and incoming calls fail.
Incorrect DN. Error identified at Incoming Voice/Data Call
Test. Incoming calls fail.
on page 6-22
on page 6-23
on page 6-23
on page 6-24
on page 6-22
on page 6-23
on page 6-23
on page 6-24