Installing The Winspm Software - Avaya MERLIN MAGIX Maintenance And Troubleshooting Manual
Integrated system release 2.0 and earlier
Hide thumbs
Also See for MERLIN MAGIX:
- Release note (24 pages) ,
- System programming (2 pages) ,
- Configuration note (12 pages)
Table of Contents
Advertisement
Internal or External connection:
I
– Modem that supports 1200- or 2400-bps connections
– Modem cable
In addition, a parallel printer is useful for reports. The PC needs a parallel port for the connection.
WinSPM uses Interrupt 4 and I/O address 3F8 for COM1. It uses Interrupt 3 and I/O
address 2F8 for COM2.
Installing the WinSPM Software
The WinSPM software is installed from the CD-ROM.
1. Insert the CD-ROM into your CD-ROM drive.
2. From the Start menu, select Run.
3. When prompted for the file or folder you want to open, type D:\setup.exe. (If your CD-ROM
drive is set up as a different drive letter, replace D as necessary.)
Installation creates a program group named "Lucent Solutions." This group contains a folder titled
"WinSPM," which contains an icon titled "WinSPM." Clicking on this icon starts the WinSPM
application. Upon installation of the WinSPM software, the WinSPM main screen appears (see
''About the WinSPM Main Screen Options''
3
on page
17
for more information):
About WinSPM
Installing the WinSPM Software
3-3
Advertisement
Chapters
Table of Contents
Troubleshooting
