Avaya MERLIN MAGIX Maintenance And Troubleshooting Manual page 87

Maintenance and Troubleshooting
Figure 4-2. Replacing a Ring Generator
1 P2
2 Remove the four screws (one on each corner of the ring generator).
3 Ring Generator Unit
4 P1
5 Wire Clip
6
Step 4: Detach cable from wire clip.
7 Grip here
8 P202
9 P101
10 Step 6: Disconnect the P101 header (grip both sides and pull forcefully)
11 Step 5: Disconnect the P202 header (pry the clip away from the header and pull the header
straight up.
12 Step 18: Wire manager: when finished, make sure the modification label "Equipped with
129B Freq Gen" is attached
Power Supply Problems
4-6