Overview - Avaya MERLIN MAGIX Maintenance And Troubleshooting Manual

System Programming Console

Overview

The system programming console is a 4424LD+ telephone (see Figure
20L telephone (see Figure
you begin system programming on a new system for the first time, the console must be connected
to the first jack on the first 412 LS-ID-TDL or 024 TDL module if you are using a 4424 LD+
telephone, or to the first jack on the first 008 MLX module, 016 MLX module, or 408 GS/LS-ID-
MLX module if you are using an MLX-20L telephone. The first jack on the first TDL or MLX module
is factory set as the system programming jack and as an operator position. When you program for
the first time, you can change the system programming jack to any one of the first five jacks on the
first 412 LS-ID-TDL module or 024 TDL module, or on the first 008 MLX module or 408 GS/LS-ID-
MLX module. This allows you to program without interfering with the operator's call handling.
2-2 on page 2-3) connected to the system programming jack. When
2
2
2-1 on page 2-2) or MLX-
2

Overview

2-1