Avaya MERLIN MAGIX Maintenance And Troubleshooting Manual page 166

Table 6-5. NI-1 BRI Provisioning Test Result Codes–Continued
Result
Code Description
Error in MERLIN
CO-DNV
MAGIX
administration of
DN and/or CO
provisioning error
for voice calls on
that facility
Error in MERLIN
CO-DND
MAGIX
administration of
DN and/or CO
provisioning error
for data calls on
that facility
Error in MERLIN
CO-DDV
MAGIX
administration of
DN and/or CO
provisioning error
for voice and data
calls on that facility
Incorrect DN
DN
administration
Corrective Action
The facility is correctly programmed and established with
layers 1, 2, and 3. However, no incoming voice calls can be
received. Check that the facility is programmed with the DN
provided by the LEC.
If the facility is part of an MLHG, check if the voice MLHG
DN is absent. If the voice MLHG DN is absent, administer it
and rerun the test. The possible causes of this error are:
Incorrect DN/MLHG DN
Incoming voice calls are not possible. Error identified at
Incoming Voice Call Test and the DN and MLHG DN
cannot be verified.
The facility is correctly programmed and established with
Layers 1, 2, and 3. However, no incoming data calls can be
received. Check that the facility is programmed with the DN
provided by the LEC.
If the facility is part of an MLHG, check if the data MLHG
DN is absent. If the data MLHG DN is absent, administer it
and rerun the test. The possible causes of this error are:
Incorrect DN/MLHG DN
Incoming data calls are not possible. Error identified at
Incoming Voice Call Test and the DN and MLHG DN
cannot be verified.
The facility is correctly programmed and established with
Layers 1, 2, and 3. However, no incoming data calls can be
received. Check that the facility is programmed with the DN
provided by the LEC.
If the facility is part of an MLHG, check if the MLHG DN is
absent. If the MLHG DN is absent, administer it and rerun
the test.
The possible cause of this error is any combination of the
causes of CODNV and CODND .
The facility is established in Layers 1, 2, and 3. Check that
the facility is programmed with the DN provided by the LEC
and rerun the test. If the error persists, contact the LEC.
If the facility is part of an MLHG, check if the MLHG DN is
absent. If the MLHG DN is absent, administer it and rerun
the test.
Tests
NI-1 BRI Provisioning Test
6-17