Avaya MERLIN MAGIX Maintenance And Troubleshooting Manual page 96
Integrated system release 2.0 and earlier
Hide thumbs
Also See for MERLIN MAGIX:
- Release note (24 pages) ,
- System programming (2 pages) ,
- Configuration note (12 pages)
Table of Contents
Advertisement
Table 4-2. Error/Status Codes Displayed on Processor Module During Forced Installation
Error/Status Codes
L
U
2
4
3
7
9
Certain conditions force the system to retry the forced installation. The dot on the error/
status code display becomes lit at the start of the first retry. (Look carefully; the dot may
be hard to see.)
Meaning
Upgrade is in progress
Install is in progress
Incorrect memory card type
Memory card corrupted
Incorrectly inserted or
missing memory card
Bad processor board
Unknown
Control Unit Problems
Action
No action required.
No action required.
Insert correct memory card and repeat
forced installation procedure.
Insert new memory card and repeat
forced installation procedure.
Insert memory card correctly and repeat
forced installation procedure.
Check that memory card is inserted
correctly and try installation again. If it
fails again, replace the processor
module.
Try installation again with a new memory
card. If it fails again, contact your
technical support organization.
Processor Problems
4-15
Advertisement
Chapters
Table of Contents
Troubleshooting
