Avaya MERLIN MAGIX Maintenance And Troubleshooting Manual page 406

System Programming Basics
14. Print a new Group Coverage Information report and compare it to the previous Group
Coverage Information report. Verify that the appropriate members are in the group. Program
as necessary to match the previously printed report.
15. Program the buttons that were identified in Step 8 that previously pointed to the extensions on
the 016 T/R module you replaced.
Because the extension type changed for the T/R extensions, these buttons may not
be needed. Confirm the need with the customer before restoring.
16. If additional 016 MLX modules are to be added, repeat ALL of the above steps. If not, go to
Step 17.
17. If phantom modules were programmed, re-program the phantom modules, as needed using
the information in the Extension Information reports printed in Step 3.
18. Program the new extension ports to meet the customer's needs.
19. Back up the system to a new filename to keep the first backup intact. Use a filename that
describes the post-016 MLX configuration-for example, "post-016 MLX."
Board Renumbering with the 016 MLX Module
3-54