Figure 4-3. Inserting a Memory Card
1
Processor Module
2
Error/Status Code Display
3
PCMCIA Interface Slot
4
Push in to remove Memory Card
5
Memory Card
6
Alarm Status LED
3. Inserting a Memory Card
4. From the programming console or from WinSPM in Standard SPM mode, do the following:
→
Menu
Maintenance
If maintenance screens are unreliable or not available, power cycle the system by
turning off the system and leaving it off for at least one second. Turn the system back
on. The system boots from the memory card and automatically starts the installation
software. Go to Step 6.
1
4
→
→
System
Upgrd/Instll
2
3
5
6
→
→
Back
Back
Control Unit Problems
→
Yes
Processor Problems
4-13