Advertisement
Overview
Check to make sure you have all the following components:
• Messager MP3
• Message Mate MP3 card (Sold Separately)
• 12VDC Power Pack
• User Manual
• 6' RCA to RCA Cable
• 1/8" adapter (This is used on some phones or P.A. systems)
• (2) wall mount screws
• 6' USB Cable
Additional Requirements
A computer with Windows XP Home or Professional with Service Pack 1 or later, as well as an available
USB port.
Setup
Step 1: Place the Messager MP3
Step 2: Connect the included RCA cable to the 8Ω or 600Ω output of the Messager MP3. Connect
the other side of the RCA cable to a speaker or receiver for testing the audio. We have included an
optional 1/8" adapter for use on some inputs.
Step 3: Insert the Message Mate MP3 card into the Messager MP3
Step 4: Plug the included power pack into a standard wall outlet. Plug the other end into the connector
marked 12VDC on the rear of the Messager MP3
Step 5: Plug the included USB Cable into the back of the Messager MP3
available usb port on the computer. Windows should recognize the device and automatically load the
necessary drivers.
+
next to a computer running Windows XP Home or Professional.
+
.
+
.
+
- 3 -
. Plug the other end into an
+
Advertisement
