Honda CBR650F Service Manual page 249

dummyhead dummyhead
CRANKCASE/TRANSMISSION
Remove the bolts [1] and mainshaft bearing setting
plate [2].
Slide the mainshaft assembly [1] off the upper
crankcase and remove the right mainshaft bearing [2].
Remove the mainshaft assembly.
INSPECTION
Inspect the following parts for scratch, damage,
abnormal wear and deformation. Replace if necessary.
– Transmission gears
– Transmission bushings
– Transmission bearings
– Shift drum/bearing
– Shift forks
– Shift fork shaft
Measure each part and calculate the clearance
according
SPECIFICATIONS (page 1-8).
Replace any part if it is out of service limit.
MAINSHAFT BEARING
REPLACEMENT
Remove the transmission (page 13-7).
Remove the mainshaft bearing [1] using the special
tools as shown.
TOOLS:
[2] Bearing remover set, 20 mm 07936-3710600
[3] Remover weight
[4] Remover handle
13-8
to CRANKCASE/TRANSMISSION
07741-0010201
07936-3710100
[1]
[2]
[1]
[2]
[2]
[1]
[3]
[4]