Honda CBR650F Service Manual page 313

dummyhead dummyhead
REAR WHEEL/SUSPENSION
REAR WHEEL
REMOVAL/INSTALLATION
Remove the following:
CBR650FA,
CB650FA:
– Two bolts [1]
– Wire stay [2]
– Rear wheel speed sensor [3]
Loosen the axle nut [1].
Support the motorcycle using a hoist or equivalent and
raise the rear wheel off the ground.
Loosen the lock nuts [2] and turn the adjusting bolts [3]
so the wheel can be moved forward all the way.
Remove the axle nut and right adjusting plate [4]
Support the caliper
so it does not hang
from the brake
hose. Do not twist
the brake hose
Push the rear wheel forward.
Remove the axle [1] and left adjusting plate [2].
Derail the drive chain [3] from the driven sprocket and
remove the rear wheel.
• Do not operate the brake pedal after removing the
wheel.
Remove the following:
– Left side collar (flange) [1]
– Right side collar [2]
17-4
[3]
[1]
[4]
[1]
[1]
Left side: Right side:
[1]
[2]
[2]
[3]
[3]
[2]
[2]